Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Orlando, FL
A driveway gate in Orlando costs $3,800 to $9,500 installed on average, with most single-swing steel gates landing between $4,200 and $6,800 before any opener or access-control work. If your gate is sagging, refusing to open, or simply looks like it has seen one too many hurricane seasons, a replacement may make more sense than repeated patch jobs. Calder Gate Repair Orlando installs, automates, and services driveway gates across the metro, from Baldwin Park to Winter Garden to Lake Nona, and we put every price in writing before the first bolt comes off the truck. Call us at (850) 338-6230 for a free estimate, or read on for how the process works and what a new driveway gate should actually cost in Orlando.
Installing a driveway gate is not just a curb-appeal upgrade. Around Orlando, a functioning gate is also a quiet security layer: it slows package thieves, keeps curious tourists out of driveways in short-term-rental neighborhoods, and prevents kids and pets from wandering toward the street. Calder Gate Repair is part of the Relay Home Co. family, founded in 2009, and we are the dedicated gate specialist inside that network. That means gate installs, automation, and repairs are what we do every single day, not a side line next to general handyman work. You can see the full scope of our installation work on our Gate Installation page.
When You Need Driveway Gate
The honest answer: most Orlando homeowners call us for a new driveway gate when the old one has stopped being reliable, not because it stopped being pretty. These are the scenarios we see most often in the field:
- A gate that sags or scrapes the driveway. Clay-rich soil and heavy summer rain shift post footings over time. If the gate drags across the concrete on the open swing, the frame or hinges are usually failing, and shimming it buys months, not years.
- An opener that dies repeatedly. Lightning strikes and voltage spikes during afternoon thunderstorms take out control boards more often than people realize. If you have replaced the same board twice in three years, a full gate and opener replacement often costs less over time.
- You bought a home with a non-working gate. Many flips in College Park and Conway include a gate that was never wired correctly, or is missing a safety loop entirely. We see this constantly.
- The existing gate no longer matches the home. After a major renovation, a dated chain-link or rusted steel gate drags down the whole property. A fresh steel or aluminum driveway gate changes the front elevation immediately.
- Security concerns in rental-heavy neighborhoods. Short-term rental areas around Disney and downtown see real foot traffic. Owners often want a controlled entry point that keeps vehicles out while still allowing pedestrian access.
- Code compliance after a new build or fence project. Some HOAs in Windermere and Dr. Phillips require driveway gates to meet specific height, material, and setback rules before final approval.
Our Driveway Gate Process
We built our install process around one idea: you should never wonder who is showing up or what the bill will say. Here is exactly how a driveway gate job runs with Calder Gate Repair Orlando, from first call to final walkthrough.
- Call or book a visit. A real person answers 24/7, not a voicemail tree. We ask about your current gate, your opener brand if you have one, and what is not working. Then we schedule a time window and send you a live, trackable arrival link via text.
- On-site inspection and honest options. A uniformed, background-checked tech walks the site: post condition, driveway slope, gate weight, existing opener, power access, and your HOA rules if applicable. We give you a straight answer on repair versus replacement, with real numbers attached to each path.
- Written price before any work starts. You get a line-item quote on the spot. That number is the number on the final invoice. No vague allowances, no “we will see once we open it up” surprises. If you approve, we schedule the install.
- Installation day. We remove the old gate and opener, set posts in concrete at the correct depth for Orlando’s soil, hang the new gate, and wire the automation. We test the full open-close cycle, set the limits, and adjust the safety features, including the entrapment sensors.
- Walkthrough, photos, and digital invoice. We show you how the gate, keypad, remote, and app controls work before we leave. You receive before-and-after photos, an itemized digital invoice you can pay from a link, and a written 365-Day Done Right Promise on the whole job.
Driveway Gate Pricing in Orlando
Nobody likes guessing what a big project will cost. Here is what we tell Orlando homeowners before they call: a basic single-swing steel driveway gate, installed, typically starts around $3,800. A wider double-swing gate with automation and an intercom or keypad system runs between $6,000 and $9,500. Aluminum costs slightly more than steel on material, but it resists corrosion better in Florida humidity and near-coast air. Custom ornamental or wood-clad gates land higher, and we quote those after a site visit because the variables genuinely change the price.
What moves the number:
- Gate size and weight. A 16-foot double-swing gate requires heavier posts, stronger hinges, and a more powerful opener than a 10-foot single.
- Opener type and brand. We install and service LiftMaster, FAAC, BFT, and Linear systems. A basic AC-swing opener costs less than a DC-powered, battery-backup unit with app control.
- Access control. A simple keypad is affordable. Adding a video intercom, phone-app entry, vehicle detection loops, or HOA-mandated emergency access raises the total.
- Site conditions. Sloped driveways, long power runs from the house, and old concrete that needs cutting for post footings all add labor.
- Permit costs. Some Orlando-area municipalities and HOAs require permits or architectural review for driveway gates. We handle the paperwork and tell you the exact fee before you commit.
Most gate opener repairs run $150 to $450 before parts, for reference. If your gate still looks fine but will not move, call us before assuming you need a full replacement. A $200 limit-switch fix beats a $5,000 install every time. Estimates are free, and the number we give you is the number you pay. Call (850) 338-6230 to get yours.
FAQs – Driveway Gate
How much does a driveway gate cost in Orlando?
A driveway gate in Orlando typically costs $3,800 to $9,500 installed, depending on gate size, material, opener type, and access-control features. Single-swing steel gates account for most of our installs and fall in the $4,200 to $6,800 range. The free estimate we give you includes a written, line-item price so you can compare options side by side. Call (850) 338-6230 and we will break down the numbers for your specific driveway.
Is it better to repair or replace my existing driveway gate?
Repair is almost always cheaper in the short run if the gate frame, posts, and hinges are still solid, and most opener issues fall into the $150 to $450 labor range before parts. Replacement makes sense when the gate is sagging, rusted through at the welds, or the opener has failed repeatedly. Our techs will tell you honestly which path we would take on our own home, and we will put both prices in writing before you choose.
Can you install a driveway gate the same week?
Yes, we can typically install a standard driveway gate within 5 to 10 business days after the site visit, depending on material availability and any required HOA or permit approvals. Urgent jobs, like a gate stuck open and blocking a driveway, get priority scheduling. Call (850) 338-6230 and we will give you a real install window, not a vague range.
Do you work with LiftMaster and FAAC driveway gate openers?
We install and service LiftMaster, FAAC, BFT, and Linear openers regularly, and our techs carry common boards, arms, and remotes for all four. If your opener failed right after a storm, we can usually diagnose it in one visit and give you a written quote on the spot. A live person answers the phone 24/7 and can schedule your visit immediately.
Written by Nico Alvarez, Owner at Calder Gate Repair Orlando, serving Orlando.