Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Orlando Owner’s Guide

Ghost Controls keypad and intercom repair in Orlando typically runs $165 – $395 installed, depending on whether we’re replacing the keypad, the intercom board, or both. Most jobs are done same-day because our trucks carry Ghost Controls-compatible keypads, wiring harnesses, and intercom modules for the common residential series. The telltale sign owners call us about: the keypad lights up but the gate won’t move, or the intercom rings but you can’t hear anyone through it.

Call (850) 338-6230

We see this a lot in Orlando neighborhoods like Dr. Phillips, Baldwin Park, and Lake Nona. Humidity gets into the housing, the membrane buttons start ghost-pressing (no pun intended), and eventually the keypad stops sending the signal to the control board. Nico Alvarez has swapped hundreds of failed Ghost Controls keypads and intercoms across the metro. It’s a common failure point, but it’s also one of the fastest repairs we do.

Key takeaways:

• Installed repair cost: $165 – $395, written price before we touch a bolt
• We stock Ghost Controls-compatible keypads and intercom parts on our trucks for same-day service
• 365-Day Done Right Promise on every repair: if it fails within a year, we return free
• OEM Ghost Controls parts and quality aftermarket equivalents both available, we’ll explain the difference before you spend

Which Ghost Controls Models This Applies To

Ghost Controls residential gate openers use a few distinct keypad and intercom configurations. The most common in Orlando are the AXDP and HYDP series, which pair with the standard Ghost Controls wired keypad (the GCP1) and the GCM1 intercom module. If you have a TDS2 or a TSS1, the keypad wiring is different, and the intercom may be integrated into the main board rather than mounted as a separate unit.

The part number is printed on the back of the keypad housing or on the intercom’s PCB, usually under a QR sticker. If the label is weathered or missing, our techs identify the part by connector style and the number of wires in the harness. That matters, because a keypad wired for an AXDP won’t necessarily talk to a TDS2 without a dip-switch change or a firmware-level compatibility check.

One thing to know about Ghost Controls: their OEM keypads are built to a specific membrane spec that doesn’t always love Florida weather. We offer OEM replacements, but we also stock aftermarket keypads with sealed silicone membranes that hold up better against Orlando’s wet season. The aftermarket versions typically cost $15 – $30 less than OEM and come with the same 365-Day Done Right Promise from us. We’ll show you both options and the price difference in writing before we order or install anything.

Calder Gate Repair Orlando is an independent service provider and is not affiliated with Ghost Controls. And if your Ghost Controls openers sit alongside a mix of other brands on the property, we’ve also got stock for LiftMaster, Mighty Mule, and DoorKing keypads on the truck.

Signs Your Ghost Controls Keypad Is Failing

• Keypad lights up but no response. The membrane buttons send a signal, but the encoder chip on the keypad’s board has failed. This is the most common failure in humid climates like Orlando’s. Replace the keypad, keep the existing wiring.
• Intermittent beeps or random gate activations. Moisture has found its way under the membrane, causing false contact closures. This often shows up after heavy rain or a pressure washing overspray. It won’t dry out reliably.
• You enter the code, nothing happens at all. No backlight, no beep. Check the wire at the opener’s control board first, but if the board is clean and you still get nothing, the keypad is dead.
• Intercom rings but audio is garbled or one-way. The intercom board’s audio amplifier or the speaker cone is failing. Sometimes you hear the visitor, sometimes you don’t. This is a board-level issue, not a wiring problem.
• Keypad works after you press hard or at an angle. The carbon contact layer under the membrane is worn. This is the early warning sign. It’ll stop working completely within a few weeks to a couple months.

Replacement Cost & What’s Included

Here’s the range for Orlando, where our techs do this all the time:

• Keypad replacement (OEM Ghost Controls): $185 – $250 installed
• Keypad replacement (sealed aftermarket equivalent): $165 – $220 installed
• Intercom board repair/replacement: $240 – $345 installed
• Keypad + intercom replacement together: $295 – $395 installed
• Labor only (if you already bought the part): $95 – $130

Every quote includes the part, labor, wiring check, and a function test across the full open-close cycle. Everything we remove is left with you if you want it. The price you agree to before we start is the price on the invoice. No “unexpected complexity” add-ons, not from us.

Every repair is covered by the 365-Day Done Right Promise: if the keypad or intercom repair fails within a year, we come back and make it right, free. Written on every invoice, always.

DIY or Call Us?

A keypad or intercom repair on a Ghost Controls opener involves low-voltage DC wiring, and that’s not the same kind of hazard as a high-tension spring or a mains-voltage panel. A careful homeowner can safely unscrew a keypad and check for corroded contacts or a loose splice. That part is fine.

What goes wrong on DIY: mixing up the four-wire color code, swapping in a keypad from the wrong Ghost Controls series, or not waterproofing the splice with silicone-lined wire nuts and a drip loop. All of that creates a callout a week later when the gate stops responding at 10 p.m. If you’ve checked the basics and it’s still dead, call us at (850) 338-6230. We’ll be out there with the right part and a written price before the first screw comes out.

FAQs