Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Orlando?
Gate parts and welding work in Orlando runs $165 to $1,700, depending on whether you’re fixing a hinge, welding a cracked post, or replacing a bent gate frame. Most homeowners in the Orlando metro call us for gate repairs in the $250 to $600 range. Below, we break down exactly what each type of work costs in 2026, what drives the price up or down, and how our written-before-we-start pricing means the number you approve is the number you pay.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what we’re quoting for gate parts and welding in Orlando right now. These are real ranges for Dr. Phillips, College Park, Winter Park, Baldwin Park, and the neighborhoods around Lake Nona and MetroWest, where steel gates get hammered by rain and humidity at different rates.
| Service | Typical Cost Range | What It Includes |
|---|---|---|
| Weld-on gate hinge replacement | $165 – $320 | Two weld-on barrel hinges, grinding off old hardware, alignment, rust-resistant coating |
| Cracked gate frame repair (steel or wrought iron) | $280 – $650 | Grinding the crack, MIG or TIG weld, reinforcement plate if needed, touch-up paint |
| Broken gate post re-weld or sleeve repair | $350 – $800 | Straightening or splicing the post, welding a steel sleeve, re-anchoring, paint |
| Decorative scroll or finial replacement | $195 – $450 | Fabricating or ordering the replacement piece, welding it in, blending the finish |
| Weld-on wheel replacement (V-track or cantilever) | $220 – $480 | New steel or nylon wheel, welding or bolting, track adjustment |
| Gate sag repair (without full replacement) | $300 – $700 | Adjusting or replacing hinges, welding an anti-sag truss brace, re-hanging the gate leaf |
| Custom gate fabrication (per linear foot) | $85 – $150 per ft | Steel frame, pickets or slats, hardware, paint or powder coat, install |
| Aluminum gate welding | $250 – $600 | TIG welding aluminum frames, often on Lake Nona or Windermere pool gates |
| Full gate frame rebuild with new steel | $900 – $1,700 | Cutting out the old frame, fitting new square tube, welding, hanging, paint |
Labor is the biggest line item. We charge $95 to $135 per hour for gate welding work, and most small jobs take 1.5 to 3 hours. The materials, steel stock, hinges, wheels, and paint, typically add $40 to $180 on top. A broken hinge is a quick stop. A sagging double gate with cracked posts is a half-day job. That’s the spread you’re seeing in the table.
What Affects Gate Parts & Welding Pricing in Orlando
- Gate material. Wrought iron and steel weld predictably with MIG or stick. Aluminum takes TIG welding, a slower process with different filler rod, which runs about 25% to 40% more per hour. Orlando has a lot of aluminum gates in newer communities like Vista Lakes and Avalon Park, and we price those higher because the process demands more time and skill.
- How much rust you’re dealing with. Orlando’s wet season, June through September, combined with salt air that drifts inland from the coast, eats steel fast. A gate that’s been rusting for three years needs extensive grinding before weld metal will hold. Grinding and prep time can add $80 to $200 to a job that would otherwise be a quick weld.
- Gate weight and size. A 12-foot driveway gate weighs several hundred pounds. Welding sag reinforcement or replacing hinges on a gate that size means more labor, bigger braces, and sometimes a second technician to hold the leaf while we work. Big gates near Bay Hill, where lots sit wide and set back, cost more than a small pedestrian gate in Audubon Park.
- Post condition. When the gate post itself is cracked or rusted at the base, the fix gets structural. We may need to cut the post, sleeve it with fresh steel, and re-weld, or re-anchor it in fresh concrete. That’s $350 to $800 instead of a $165 hinge swap, and it’s common in Orlando because post bases stay wet longer than the rest of the gate.
- The opener is involved. If the welding issue is also throwing the opener out of alignment, you may need a limit switch reset or a new arm bracket after the weld work is done. Opener-related parts run $40 to $180 on top of the welding labor.
- Finish work and paint. Weld repair leaves exposed metal, and in Orlando’s humidity, that metal rusts fast. Most customers want us to prime and paint the repair area. That adds $50 to $120, but it’s the difference between a fix that lasts a decade and one that rusts through in two years.
Common Gate Parts We Weld or Replace in Orlando
We work across the whole gate assembly. Here are the parts homeowners in Orlando call us about most, with real price ranges for 2026:
- Weld-On Barrel or Strap Hinges: $165 – $320 installed per pair. This is the single most common gate repair call we get in neighborhoods like Conway and Belle Isle, where steel driveway gates have been swinging for 15 to 20 years.
- V-Track and Cantilever Wheels: $220 – $480 installed, including welding or bolting and track adjustment. Sliding gates in Orlando fail disproportionately at the wheel because grit from driveways wears them down. If you hear a grinding sound when the gate moves, the wheel is usually the culprit.
- Gate Latches and Lock Hardware: $95 – $250. A weld-on latch plate or a replacement latch can tighten a gate that no longer closes securely. This matters in Orlando, where HOA rules and insurance policies expect gates to close and latch every time.
- Gate Stops and Catch Posts: $140 – $350. A bent or broken catch post means the gate swings too far and stresses the hinges. We straighten, re-weld, or replace the stop hardware so the leaf lands where it should.
- Anti-Sag Truss Braces: $250 – $500. A diagonal steel brace welded into the frame corrects the sag without replacing the gate. We do a lot of these in Baldwin Park and Thornton Park, where older iron gates have started to droop but the frames are still solid.
For a deeper walkthrough of what goes into this work, see our Gate Parts & Welding in Orlando service page. It covers the scope of work we do in the field, from hinge swaps to full frame rebuilds.
How the Welding Repair Process Works
When you call Calder Gate Repair Orlando, here’s the flow, start to finish. We put it in writing because transparency is the only way gate repair makes sense.
- You call (850) 338-6230. A live person answers, 24/7. You describe what the gate is doing, sagging, dragging, not latching, or making noise. We book a visit with a live, trackable arrival time, not a four-hour window.
- We arrive and assess. A background-checked, uniformed technician in a Relay Home Co. vehicle shows up. We inspect the hinges, posts, wheels, and weld seams. We quote the work in writing before anything starts. The price on that quote is the price on the invoice. It doesn’t change at the door.
- We do the weld work. We grind, prep, weld, and reinforce. Then we test the gate’s swing or slide, check the latch, and make sure the opener (if there is one) still runs true.
- We document and invoice. You get before-and-after photos and a digital invoice you can pay from a link. That’s The Relay Standard: live arrival time, written price, photo records, no paper chase.
- You’re covered by the 365-Day Done Right Promise. If the repair fails within 365 days, we come back and fix it at no charge. That’s stated in writing on every job.
How to Save on Gate Parts & Welding
- Catch hinge wear early. A gate that’s just starting to drag or sag is usually fixable with fresh hinges for $165 to $320. Let it sag for a year and you’re into a truss brace or frame rebuild at $500 to $1,700. Early fixes cost less, always.
- Don’t skip the paint. We know it’s tempting to leave bare weld metal exposed. In Orlando, that’s a rust invitation. A $50 to $120 prime-and-paint pass extends the life of a repair by years. Skipping it means paying for the same weld again after two humid summers.
- Bundle repairs. If you need a hinge replaced and the latch is loose and the wheel is worn, doing all three in one visit costs less than three separate trips. We’ll quote the bundle in writing, and you’ll save on labor.
- Get a free estimate. We don’t charge to come look at your gate. Call (850) 338-6230, and we’ll send a technician with a written quote. No obligation, no pressure. Homeowners in Orlando are often surprised at how reasonable the fix is once someone actually looks at the weld rather than guessing over the phone.
FAQs – Gate Parts & Welding Cost
How much does it cost to weld a broken gate in Orlando?
Welding a broken gate in Orlando costs $280 to $650 for a typical cracked frame repair, depending on the size of the crack and the amount of rust prep involved. Small crack repairs can run as low as $200, while structural repairs with reinforcement plates can reach $800. Call (850) 338-6230 for an exact quote, the estimate is free.
Is it cheaper to repair a gate or replace it?
Repair is cheaper when the frame is intact and the issue is hinges, a crack, or a rusted section; that work runs $165 to $700. Replacement makes sense when the steel is rusted through in multiple places or the gate is sagging badly across a 12-foot span, which runs $900 to $1,700 for a new steel gate built and installed. As a rule of thumb, we tell Orlando homeowners to repair when repair cost stays under 50% of replacement cost. Call us and we’ll give you a straight answer in writing.
How much do gate hinges cost to replace?
Replacing weld-on gate hinges in Orlando costs $165 to $320 per pair, including grinding off the old hardware, aligning the new hinges, and adding a rust-resistant coating. The hinges themselves are only $25 to $60 per pair, with labor and prep making up the rest. We’ll show you the breakdown in writing before we start.
Can you fix a sagging gate without replacing it?
Yes. We install an anti-sag truss brace, a diagonal steel strut welded into the gate frame, for $250 to $500. That restores the gate’s shape and takes pressure off the hinges. If the hinges themselves have failed, we add those at $165 to $320. Most sagging gates in Orlando never need full replacement.
Do you weld aluminum gates?
Yes. Aluminum gate welding runs $250 to $600 depending on the severity of the crack and the thickness of the material. Aluminum requires TIG welding and a different filler rod than steel, which is why it prices a bit higher. This is common work for us in Orlando communities with aluminum pool gates and modern driveway gates.
Can you come today?
In most cases, yes. We keep same-day availability for gate repair calls across the Orlando metro, and when you call (850) 338-6230, a live person books you a trackable arrival time. We know a gate that won’t close is a security problem, not an inconvenience, so we treat it with urgency.
Gate Opener Brands We Repair Alongside Welding Work
About half the welding jobs we do in Orlando involve a gate that also has an opener, and welding work can shift the gate’s alignment just enough to throw the opener off. We’re factory-familiar with nine major opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when we finish a hinge or frame repair, we can reset the limit switches, realign the arm, or replace a worn gear on the opener in the same visit. You’re not calling one company for the weld and another for the opener.
We welcome you to explore our home page if you want to understand the full scope of what we do across gate repair, electric gate repair, and gate opener repair.
Why Calder Gate Repair Orlando
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, which was established in 2009. Each location is independently owned and operated under The Relay Visibility Guarantee, which means you always know who is coming, when they’ll arrive, and exactly what the job will cost before a single bolt is turned.
Every gate parts and welding job we do in Orlando includes three non-negotiables:
- A written price before any work starts. The number you approve at the door is the number on the invoice. Never a surprise.
- A written guarantee on every repair. We put it in writing, every time.
- The 365-Day Done Right Promise. If the repair fails within 365 days, we return and make it right at no charge. That’s a free second visit, included with every repair, no fine print.
Our technicians are background-checked, uniformed, and trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, so the person at your gate understands the mechanical side and the electronics. When you call at 2 a.m. because a hinge snapped and the gate is hanging open, a live person picks up. Not a voicemail, not a chatbot.
Get a Free Gate Parts & Welding Estimate in Orlando
If your gate is sagging, dragging, cracked, or refusing to latch, don’t wait on it. A small hinge fix now is a few hundred dollars. A full rebuild later is four times that. Call Calder Gate Repair Orlando at (850) 338-6230 for a free estimate. We’ll send a background-checked technician with a live arrival time, put the price in writing before any work starts, and back every repair with the 365-Day Done Right Promise. Whether you’re in College Park, Lake Nona, Winter Park, or anywhere across the Orlando metro, we’ll be straight with you about what the weld work costs and what it doesn’t.
Pricing reflects the Orlando market as of 2026. Calder Gate Repair Orlando offers free estimates – call (850) 338-6230.
Written by Nico Alvarez, Owner at Calder Gate Repair Orlando, part of the Relay Home Co. family, serving Orlando since 2009.
What Our Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Slide gate wheels replaced. Glides smoothly now."
- Mark T."Booking was easy and the job was done quickly."
- Seth R.